Results 1 to 10 of 58
Thread: Print Quality issues (pictures)
Threaded View
-
10-02-2015, 06:39 AM #3
- Join Date
- Dec 2014
- Posts
- 42
Unfortunately, your post wasn't helpful at all. The quality is bad - it is worse than when the machine was newer. I am getting failed prints, strings, blobs, etc. Any time I waste ABS, it is not acceptable, and the horrible surface blobs on the above print are also unacceptable when the device is capable of printing perfect sides.
Please explain to me how to...
05-17-2024, 12:15 PM in 3D Printer Parts, Filament & Materials