Results 1 to 10 of 11
Hybrid View
-
09-24-2015, 08:38 AM #1
- Join Date
- Jun 2014
- Posts
- 349
Bed gap looks too high. On other prints the extrusion has time to "catch" on the bed and start printing, but on these holes it has to re-catch each hole, and it does not have time. So a smaller gap will reduce the time for the plastic to catch and start.
Also may help, don't do any retraction.
-
09-25-2015, 11:00 AM #2
Please explain to me how to...
05-17-2024, 12:15 PM in 3D Printer Parts, Filament & Materials