Uneven PLA test prints, help!

[artek1988]

Thanks guys for all your advise

I will do some more prints tomorrow, using very low extrusion speed (20mm/s or 30mm/s)

I didn't made a lot of prints, maybe 15 all togerther, however I had massive clog once , so if slow printing won't give me any positive results I will disassembly whole extruder again and cleen everything up.

[artek1988]

Slow speeds didn't helped

10. Ext. temp. 210 C, plate temp. 70 C, ext. speed 40mm/s
11. Ext. temp. 210 C, plate temp. 70 C, ext. speed 20mm/s

IMG_20150827_221152.jpg

So next step is to disassembley whole extruder and clear nozzle again...

Maybe one of you had same problem with c2c printer? I am wondering if it's not something related, and typical to this type of printer