Results 1 to 10 of 4110
Thread: Qidi Tech 1 - Replicator 1 clone
Threaded View
-
02-28-2017, 12:59 AM #10
- Join Date
- Feb 2016
- Posts
- 96
Hi guys, I just finished a print successfully and tried to do another but my right extruder (same one that just printed) is making a clicking sound and no filament is coming through. I tried using the "load right" command from the menu and gave it some pressure by pushing down on the filament, but still nothing. Any ideas? I am really hoping to avoid having to take this thing apart.
Edit 1: I took off the fan and see that there's a blob of filament in the space between the black plastic extruder motor and the metal block that the nozzle is mounted on. This could possibly be where the blockage is but I am not sure how to take it apart to clear it. We are talking about a mm of space.
Edit 2:I pulled all the filament out and am reloading it now. Hopefully this works.
Edit 3: Fixed it. Nothing to see here, carry on.Last edited by sygyzy; 02-28-2017 at 01:57 AM.
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion