Results 1 to 9 of 9
Thread: E3d-v6 Nozzle Problems
Threaded View
-
07-20-2015, 01:08 AM #1
- Join Date
- Jul 2015
- Location
- Sydney, Australia
- Posts
- 4
E3d-v6 Hotend Issues
Hi guys,
I recently installed a new hotend for my MakerFarm 10" i3v and it has been seizing extruding.
The only way to clear this is to take it apart and perform a cold pull, this happens after it prints about 100mm of filament or so.
I have taken a picture of what the filament looks like after it has been pulled.
Any help would be great!
Thanks,
Daniel
IMG_20150720_155408.jpgIMG_20150720_155417.jpgLast edited by danward; 07-20-2015 at 07:46 AM. Reason: Changed nozzle to hotend
Please explain to me how to...
05-17-2024, 12:15 PM in 3D Printer Parts, Filament & Materials