Results 1 to 2 of 2
-
07-31-2015, 11:35 AM #1
Changing nozzle on heaxgon extruder
I just got a 0.5mm nozzle, and before I go ahead and change it. Are there any thing I need to be aware of?
-
07-31-2015, 03:59 PM #2
To answer my own question and other that might be asking the same, here is how I did it:
1. Set extruder to 100C.
2. Bend away the rubber isolation.
3. Unscrew old and attach new.
Please explain to me how to...
05-13-2024, 03:08 PM in 3D Printer Parts, Filament & Materials