Results 1 to 5 of 5
Thread: Z-Height issues
Hybrid View
-
07-16-2015, 12:32 PM #1
- Join Date
- Jul 2014
- Location
- Van Nuys, CA
- Posts
- 22
The problem turned out to be my z offset for the auto bed leveling. I had checked it and thought it was correct, but when I went back to level the bed manually, I found the offset was off by about .4 mm. Once I corrected that, then I now get the proper height on my objects. I thought it was crappy filament the way it seemed like the first layer would be squashed so flat. The skirt used to look like a flat ribbon. Now it's more like I remember it used to be.
But at least I didn't have any problems with warping or objects not sticking to the bedLast edited by brucehvn; 07-16-2015 at 12:54 PM.
Please explain to me how to...
05-17-2024, 12:15 PM in 3D Printer Parts, Filament & Materials