Results 1 to 10 of 10
Threaded View
-
06-02-2015, 06:54 PM #6
- Join Date
- Jan 2015
- Posts
- 306
Hi,
I am using my MK3 heatbed at 12v right now and it cannot hit 110c. It maxes out at 103c and struggles to get there. I am using heavy gauge, high strand RC truck wire, soldered the 12V pads 2 and 3 to one cable and the other to pad to power. I am running through ramps at 12v. Bed just does not want to get hot. I checked resistance and it seemed to be within spec, somewhere around 1.6-1.8 ohm.
What am I missing?
Please explain to me how to...
05-17-2024, 12:15 PM in 3D Printer Parts, Filament & Materials