Results 21 to 30 of 39
Hybrid View
-
01-25-2016, 07:57 PM #1
- Join Date
- Jan 2016
- Posts
- 121
Oh, I didn't want to put TOO much info in there, because I don't want someone at this point to try to hack it that doesn't have any clue what they are doing and screw it up. If you don't know how to manually edit a passwd/sudoer/shadow file you should probably hold off until we have something better. I'm working on identifying pins, sadly I've been unable to control any of them with the code I wrote. I'm not sure if it is due to software already running or not. I will have my second BBB on Wednesday and will bring it up with the Pegasus Cape. I might also try to bring the printer over to my 'scope and probe around a bit.
-
01-26-2016, 10:57 AM #2
- Join Date
- Jan 2016
- Posts
- 121
I've been researching and believe I'll be using my scope to understand how the galvo's work, then once I receive my development BBB I'll start coding test routines in Python. After that I've been looking into BeagleG as a gcode translator/controller. I think it'll work with the existing hardware (it will be a users idea if they want to replace the BBB or keep the old one).
-
02-22-2016, 07:28 PM #3
- Join Date
- Jan 2016
- Posts
- 121
Here's a video I took of it printing a few layers: youtube link
-
02-23-2016, 09:00 AM #4
- Join Date
- Jan 2016
- Posts
- 121
Here is my first cube.https://photos.google.com/share/AF1Q...hJMjVjU3pleHRB
Quite a bit over exposureLast edited by doobie; 02-23-2016 at 09:09 AM.
-
02-23-2016, 04:53 PM #5
- Join Date
- Jan 2016
- Posts
- 31
I was going to say from the videos it looked like the laser was moving a bit too slow, as you've already determined.
If you want I can set mine up again and we can do a time comparison of "X" same object or objects to get the exposure time/galvo movement right.
Laser power we may be able to determine with some probing while it's running.
Great work, and keep on truckin!
-
02-23-2016, 05:59 PM #6
- Join Date
- Jan 2016
- Posts
- 121
Oops! I posted in the wrong post, meant to post that in my other post with my progress... but I'll have to see if I can find the STL file, I might also try to dry run it with the FSL3D board in there so I can get a better idea of what they are doing.
-
04-08-2016, 12:43 AM #7
- Join Date
- Apr 2016
- Posts
- 2
buy the pegasus touch, at your own risk!
Hello all that are even considering purchasing this machine, short of it DON'T!
SAVE YOUR MONEY AND AGRAVATION!
Short story:
Purchased this unit for our company to get better faster prints than the 2 FDM printers were currently using. The good, there faster! Have better resolution! If they print without failing!!!!! Thats the key. Ive used 3.5 liters of resin constantly checked leveling of the build plate and homing ive gone so far, as to surpass there "instrutional video" on youtube where they say "put 4 blocks on the corners and adjust till they all hit the build plate. How archaic!
Have thes people not heard of a dial gauge? A 0 z setting gauge? Anyway build plate leveled to within .01mm. check, homed to within .07mm of vat for proper adhesion but not to close to fail the print. Check
Now, print, fail, print, fail, call, email, call "check your leveling" im told, Print, fail, print, fail, "check your homing" im told. Print fail "ok print this test rook its your file" download, print, fail Call, email, "check your leveling" "i did its good" "check your homing" "i did its good" print, fail, print, fail, email, "Hey theres really somthing wrong here i need to get this working have prototypes to print"! "HELP!" "check your leveling" "its not the leveling its within .01mm see the pics" print, fail, call, "hello ive used almost 3.5 liters of resin and yet to get a good print, im getting no help here no information, no adjustments, can you please replace the wasted resin?" "Ya sure we will send you half a liter send us $15 for shipping" "ok thats a little bit of bad customer service, do you have any suggestions to get this thing printing?" "Check the leveling and homing" checked, perfect, print, fail. Screw this im using a different cheaper resin at least until this starts printing. Online, "maker juice g+" $cheaper great!, screw it ill try it.
Purchase, delivery, uv flashlight test" small drop" wow looks promising. Ok got the FSL resin still in the vat ill try the test rook one last time. Fail, anger, clean the vat and build plate.
Pour in the maker juice print PERFECT PRINT! HOLY CRAP GOTTA TELL FSL THIS, THERE FOR SURE GOING TO SAY OK GREAT HERE IS SOME FREE RESIN TO REPLACE YOUR LOSSES. SORRY FOR THE BS CUSTOMER SERVICE SORRY FOR DOUBTING YOUR SANITY, SORRY THE RESIN WE SOLD YOU WAS SO BAD WE'LL FIX IT.
NOPE! NOPE! NOPE!
"your not authorized to use any resin except ours, your warrentee is now void, other resins can ruin the motors and laser" "check your homing and leveling"
"FSL WILL NOT BE REPLACING ANY OF YOUR RESIN"
SO THE SHORT OF IT IS YOUR NOT ALLOWED TO USE ANY OTHER RESIN IN THE MACHINE YOU PAID OVER $4K FOR EVEN IF IT PRINTS AND THERES DOES NOT WITHOUT VOIDING THE WARENTEE ON PARTS THAT HAVE NO CONTACT, AND COULD NOT POSSIBLY BE RUINED BY A DIFFERENT RESIN, YOUR ONLY ALLOWD TO USE THE FSL RESIN AND GET POOR USELESS, FAILED, OR OTHERWISE BAD PRINTS FROM IT.
SO YOU BASICALLY HAVE A PIECE OF EQUIPTMENT THAT COST $4K WILL NOT PRINT THE RESINS THEY FORMULATE FOR IT, AND YOUR NOT ALLOWED TO USE RESINS THAT DO OR YOUR WARENTEE IS VOID!
PAPERWEIGHT ANYONE?
HOPE YOU FOUND THIS HELPFULL, ILL BE POSTING IT ALL OVER THE WEB!
HOPFULLY THE GREED MONGERS OVER AT FSL GET THERE HEAD OUT OF THERE BUTTS!
THANKS ALL HAVE A GREAT DAY!
-
04-08-2016, 05:32 AM #8Hex3D - 3D Printing and Design http://www.hex3d.com
-
04-09-2016, 07:14 AM #9
- Join Date
- Jan 2016
- Posts
- 121
This is why I'm working on open sourcing the software, busy month or two for me so it's on hold a bit, would love some help. Hoping to re do my VAT and start another print in the next 2 weeks
-
04-22-2016, 02:27 PM #10
- Join Date
- Apr 2016
- Posts
- 3
Ender 3 Neo - Jam Problem
05-08-2024, 03:06 PM in Tips, Tricks and Tech Help