Results 1 to 10 of 22
Thread: Help recalibraring ABL
Threaded View
-
05-22-2015, 09:32 PM #4
- Join Date
- Dec 2014
- Posts
- 43
So I checked the Z_PROBE_OFFSET_FROM_NOZZLE and it is set to -3.0. And everytime that I have the nozzle touch the glass and zero out the readings then have the probe touch the same spot I get the same numbers and it still wants to push into the glass.
Qidi X Plus 3 Paper thin first...
Yesterday, 01:15 AM in General 3D Printing Discussion