Results 1 to 9 of 9
Hybrid View
-
04-21-2015, 05:31 AM #1
Try to isolate the servo wires away from the motor wires. What brand servo did you use? I chose to go with a higher brand servo (hitec) for that reason. I feel the better servos have higher quality shielding. On my rambo board im using Pin 22
Last edited by voodoo28; 04-21-2015 at 07:32 AM.
Please explain to me how to...
Yesterday, 12:15 PM in 3D Printer Parts, Filament & Materials