Itty Bitty Double FLEX Extruder

[sniffle]

It's 25mm on center for the Flex E3D i would assume it's the same for the hexagon's

[clough42]

C42, per your instructions.. The hot ends should be 20 mm apart..mine are 26 apart..i cant see how 20mm is a achievable without having the slanted inwards towards each other..this measuring from tip to tip

From the OP:



The older design of IBDE is 20mm. Can't get to c42's website from work to see if the assembly instructions have a copy/paste error from the other design.

.the site says 20mm under installation instructions..

It's 25mm on center for the Flex E3D i would assume it's the same for the hexagon's

Ugh. Yes. It should say 27mm. I have updated the pages I could find. If you find that error anywhere else, please let me know.

[clough42]

Okay, I think I've answered all of the questions so far. If I missed yours, let me know..