Quote Originally Posted by rcleav View Post
Remove the aluminum bed completely from the machine by unscrewing the leveling screws and springs.
Then remove the blue pad. It will take a little effort but make sure it's perfectly clean and smooth.
You can now put the aluminum build plate back on using the same leveling screws and springs.
On the corners of the build plate that your glass mounts attach to find/buy longer M3 screws to replace the originals.
Put the new screws in both corners and tighten the original nuts up under the aluminum plate.
Then slip your corner brackets on.
I use an M3 washer and wingnut under the corner brackets to make the brackets adjustable.
Thank you! I knew I was missing something...Time to make a trip to Home Depot!