Quote Originally Posted by Syd_Khaos View Post
Worth noting that for PLA and other soft, high viscosity material your gonna want to run with the top off (and front door open). You will want the top on for ABS and anything harder, so that height still come into play, just throwing it out there.
I'm going to respectively disagree with you on this one. It depends on the ambient surrounding temp. The temps in my basement where I keep my machines is 60 to 70f year round and have to make sure the temperature in the printer is at least 70f before starting a print. Any lower and I run into bed adhesion problems. So I always keep the door closed and the top on. The Qidi can get into the mid 80's the CTC only gets to the upper 70's.