Quote Originally Posted by djprinter View Post
Try printing cooler, if retraction is causing the holes in the print it means it's pulling soft plastic back off the print during the retraction. If you print cooler or add a cooling fan you may be able to prevent this.

Stringing by itself is a sign that you're printing too hot in the first place
I tried a few more prints and I may have found the culprit.
It may have been retraction vertical lift as after disabling this setting, the print had almost no stringing at all.
I have reduced the temperature to 190°c and this seems to have helped the print.
There are still small pits in the surface of the print and I also suspect that there is some wobble or minor misalignment between the x and y axis (visible on the windows).
http://imgur.com/a/Z8CeJ
Anyone know if I'm right?
If that is the case, does anyone know how this can be fixed/corrected?