Results 1 to 10 of 321
Thread: Flashforge 3D Creator forum.
Threaded View
-
03-14-2014, 04:17 AM #11
- Join Date
- Feb 2014
- Posts
- 14
I also lost one when working on my extruder - the spacer is important as it allows you to tighten the bolt that holds the fan without distorting it. I made a replacement from a piece of brass tubing - It is about 10mm long. Any diameter will work so long as it fits the bolt.
Of course, I found the missing part after reassembly!
Good luck!
dave
Please explain to me how to...
Yesterday, 10:55 PM in 3D Printer Parts, Filament & Materials