Results 2,451 to 2,460 of 4110
Thread: Qidi Tech 1 - Replicator 1 clone
-
07-20-2016, 03:52 PM #2451
- Join Date
- Aug 2014
- Posts
- 627
-
07-20-2016, 04:01 PM #2452
- Join Date
- Feb 2016
- Posts
- 360
Seems kinda silly to spend $20 on 5 nozzles and 5 tubes.
Esp since you can use the same $20 for 5 nozzles and 3m of PTFE.
Has anyone had to change out their throats? Seems like they don't get to much wear on em at all.
I'm still tempted to try the black PTFE my buddy in Cali was telling me about....supposed to be tolerant of temps upto 700c.
-
07-20-2016, 04:12 PM #2453
- Join Date
- May 2016
- Location
- Annapolis, MD
- Posts
- 523
-
07-20-2016, 04:33 PM #2454
- Join Date
- May 2016
- Location
- Annapolis, MD
- Posts
- 523
Has anyone tried a non .4mm nozzle on the QiDi?
Here are some .2mm ones in steel at $13 / qty 5 www.amazon.com/dp/B01IH5HZSE
They do actually have a "20" stamped on the nozzle in the pix, so it's not a typo.
-
07-20-2016, 04:41 PM #2455
- Join Date
- Aug 2014
- Posts
- 627
-
07-20-2016, 04:43 PM #2456
- Join Date
- Aug 2014
- Posts
- 627
-
07-20-2016, 06:40 PM #2457
- Join Date
- Feb 2016
- Posts
- 360
-
07-20-2016, 06:53 PM #2458
- Join Date
- Jun 2016
- Location
- Oklahoma
- Posts
- 904
-
07-20-2016, 06:58 PM #2459
- Join Date
- May 2016
- Location
- Annapolis, MD
- Posts
- 523
-
07-20-2016, 07:06 PM #2460
- Join Date
- Aug 2014
- Posts
- 627
With a rough filament, like Carbon fiber and glow in the dark, etc... all of the YT video guys who tried didn't even get one print before the Brass nozzle was worn enough to be noticeable and one the nozzle's orifice became larger mid print due to the abrasive filament being used. For regular filament SS nozzles are just overkill.
Holes and pockmarks in print walls
06-04-2024, 09:14 AM in General 3D Printing Discussion