Results 1 to 10 of 11
Thread: Help with retraction settings
Threaded View
-
06-29-2016, 08:13 AM #9
- Join Date
- Jun 2016
- Posts
- 6
I seem to have forgotten to change it to 0.4 after setting extrusion width to manual. It was set to automatic at 0.4mm which automatically changed the nozzle diameter 0.38 for some reason.
Also, I meant to ask what would be nearest appropriate position to avoid visible seams on the print?
BambuX1Carbon($2k) vs MarkTwo($20k)
05-31-2024, 12:45 PM in 3D Printers (Hardware)