Results 1 to 8 of 8
Thread: Pegasus Z-coupler
Threaded View
-
06-22-2016, 09:50 PM #7
- Join Date
- Jul 2014
- Posts
- 305
I had like 3-4 other solutions but they required a lot of work, so I decided on this method.
I also though about using spacers under the springs, but I thought the springs may kick the spacers out during a print and unlevel the bed. I found the longer springs at a Ace Hardware and paid about $2.00 for a full set of springs.
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help