Results 171 to 180 of 189
Thread: Show your MODS
-
03-05-2016, 11:50 PM #171
Really nice looking. Clean and excellent wire/cable management.
Bambu P1S/AMS
NVision4D http://nvision4d.com
-
03-06-2016, 06:02 PM #172
- Join Date
- Jul 2014
- Posts
- 305
Does that drag chain run into the aluminum extrusion at the top?
-
03-06-2016, 06:12 PM #173
- Join Date
- Jan 2016
- Posts
- 2
-
04-03-2016, 09:50 PM #174
- Join Date
- Mar 2016
- Posts
- 4
-
04-04-2016, 09:27 AM #175
- Join Date
- Dec 2014
- Location
- Canada
- Posts
- 498
easy way to reduce 80% of the warping with ABS.. Switch to PETG, it doesnt shrink and warps much less then ABS,
I use PETG and I add a few mouse ears to parts that will likely warp and it fixes the issue.
plus ABS is toxic so avoid using it. PETG isnt toxic and its very strong
I dont use an enclosure yet
-
04-04-2016, 09:51 AM #176
I am having such a hard time getting petg figured out. for the right extrusion/ temp settings etc. I don't mind the strings but small prints I am wondering if I need a print fan because it is not working, and the first layer seems to have issues sticking, which is really odd as I have a sheet of PEI, However my first print with PETG, I printed at ABS temps, and ran into some issue, and had to pry the print off, which might have messed up the pei, and I am wondering if it warped my glass-cork-wood bed.
-
04-04-2016, 10:24 AM #177
- Join Date
- Dec 2014
- Location
- Canada
- Posts
- 498
for PETG I print 245 nozzle with Fan blowing 100%, 80 bed with PEI, with great results
-
04-04-2016, 08:48 PM #178
I have had great success printing PETG at 240C/80C with Garnier Fructis Extreme Hold #5 on glass.
-
07-11-2016, 01:50 PM #179
- Join Date
- Jul 2016
- Posts
- 43
PETG works great for me at 240/80 and elmers kid glustick on my glass.
-
07-11-2016, 04:11 PM #180
- Join Date
- Nov 2014
- Location
- Brevard, NC
- Posts
- 182
I am just printing PETG at 230 with no heatbed on painters tape & elmer's gluestick on Mirror from Lowes.
Ender 3v2 poor printing quality
10-28-2024, 09:08 AM in Tips, Tricks and Tech Help