Results 61 to 70 of 99
Thread: Post your scans here !
-
01-17-2016, 04:04 PM #61
I'll put together a detailed procedure and post it on our website soon.
Regards,
Dave @ NERV
www.NervIndustries.com
-
01-18-2016, 03:09 AM #62
- Join Date
- Dec 2015
- Posts
- 8
ok, great!
-
01-22-2016, 12:36 AM #63
- Join Date
- Dec 2015
- Posts
- 8
Can't find any further information on your website!?
You used SolidWorks? Which Software? Which Add-Ins?
Thank you....
-
01-26-2016, 01:44 AM #64
@Nerv Hi Dave, hope to see some tips soon. You seem to have lots of experience with the Einscan, thanks for all the info and help.
-
03-05-2016, 06:55 AM #65
-
03-21-2016, 09:50 PM #66
- Join Date
- Mar 2016
- Posts
- 5
Also interested in a tutorial. I can manual scan and auto align in one rotational plane, but as soon as I flip it (to get missing data), it can't figure it out. Maybe I need an intermediate rotation to allow it to understand. Works for natural shapes as there is little symmetry but a uniform shape it struggles.
Also, is the scan to scale? It is hard to tell. Any good way to orientate correctly once in meshmixer? This is all new but exciting!
-
03-26-2016, 06:20 AM #67
-
03-26-2016, 09:11 AM #68
- Join Date
- Aug 2015
- Posts
- 241
I have been scanning with 1.7.3 for a few days works great, but I only have the Einscan-s also for a few days.
it is giving my iMac and Win scan laptop a workout, these files are huge
And here are my first test scans
The Catwoman head is a little smaller the a life size head.
The Rancor is about 5cm in height.
Last edited by This; 03-26-2016 at 09:20 AM.
-
03-26-2016, 10:08 AM #69
-
03-26-2016, 10:28 AM #70
- Join Date
- Aug 2015
- Posts
- 241
I also noticed that the surface is very important to get a good scan,
white or light gray and matte as possible, and one uniform color, and especially no black or dark colors.
I guess some hairspray should also dull the surface a lot, and is easily removable.
I looked into some special spray cans, that spray a matte white powder on the surface that can be brushed off.
http://www.laserdesign.com/3d-scan-spray/
https://www.igo3d.com/en/3d-coating-spray.html
My 3D Norn Emissary print
09-13-2024, 02:28 AM in 3D Printing Gallery