Quote Originally Posted by rcleav View Post
I also tried it and had the same problem.
It was written for an older machine that doesn't have the cooling fan on the left side of the extruders for print cooling.
I played around with the X coordinate in the startup script and found if I change it to -110 it does not hit the left side and grind. This really doesn't make sense to me because I opened up the manual control in Simplify3D and moved the head to X-130 and it did not hit but running the startup script X-130 does hit. There must be an offset somewhere that I'm not seeing. Need further investigation.

Here is the what I changed the "Move to wait position off table" line to:

Code:
G1 X-110 Y-75 Z30 F9000 ; Move to wait position off table