Results 1 to 5 of 5
Thread: Peachy Software Problem
-
02-24-2016, 06:09 AM #1
- Join Date
- Oct 2013
- Posts
- 219
Peachy Software Problem
I have built the Peachy Printer...... not too fiddly.... Well within the capabilities of most people. The little magnets on the armature are probably the hardest part. I used 5 minute epoxy (a tiny amount) to stick those on and seems to be very effective.
However, I connected the peachy to my USB port on a windows machine and booted the software and got the error "An error has occurred - no printer found".
Checked device manager and sure enough Peachy Printer is mapped as a USB device and operating normally. Tried un-installing and re-installing the software, but same result.
Are there some dependencies I am not aware of ???
Tried it on the MAC and got "Please connect your Peachy Printer before starting the software"
So then tried Linux version on UBUNTU.
This said "not complete, more codes be needed" during the build, which failed to complete.
So I need some help !! Can anyone suggest anything I might try? Does anyone have a simple sequential list of instructions for foolproof install on any of those three platforms (including any dependencies). Any help appreciated.
-
02-25-2016, 05:35 AM #2
- Join Date
- Sep 2013
- Posts
- 308
Hey mike_biddell
I have just PM ed you my phone number, Hoping a call will get things sorted out quickly.
call any time
chat soon
-
02-25-2016, 05:41 AM #3
- Join Date
- Oct 2013
- Posts
- 219
-
02-25-2016, 06:18 AM #4
- Join Date
- Oct 2013
- Posts
- 219
Rylan
many thanks for the offer.... but almost simultaneously with your offer, I sorted it.......
Cheers
MikeLast edited by mike_biddell; 02-25-2016 at 06:35 AM.
-
02-25-2016, 08:58 PM #5
- Join Date
- Sep 2013
- Posts
- 308
oh great! .... I seem to remember something about that script needing root to add you to a "dial out group" so that your user can talk to the usb..
altho I think if you dont sudo before build.sh it should prompt you for your password.
and then it may require you to log out and back in before the changes take affect.
Holes and pockmarks in print walls
06-04-2024, 09:14 AM in General 3D Printing Discussion