Results 1 to 4 of 4
Threaded View
-
12-23-2015, 06:31 AM #2
well first check this thread out: http://3dprintboard.com/showthread.p...-Creator-forum
second, go to the flashforge section of the forum: http://3dprintboard.com/forumdisplay...ashForge-Forum
And spend the chrstmas break reading through that lot and you'll most likely get any questions you might have thoroughly answered :-)
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion