Hyrel Material Compatibility

[Davo]

MK-1 Tool

The MK-1 is a modular, hot-swappable head which prints 1.75mm filament at up to 250°C.

Validated Materials:

• ABS
• BendLay
• Flex 45
• HIPS
• LayBrick (may wear out nozzle)
• LayWoo-d3
• MoldLay
• Ninjaflex
• Nylon (Taulman 618, 645 and 910 tested)
• PET
• PLA
• PlastInk Rubber
• PP (polypropylene)
• PVA
• T-Glase

[Davo]

The EMO-25 Tool

The EMO-25 is a modular, hot-swappable head which prints in any pasty extrudable which is printable at room temperature (with a consistency between mayonnaise and peanut butter).

Validated Materials:

• 3P QuickCure Clay https://www.3pquickcureclay.com/ (polyerizes with heat gun or lighter (or laser))
• Clay http://www.youtube.com/watch?v=trdz4YDbdsw (may require firing after printing)
• FIMO http://www.staedtler.com/en/products...-and-crafting/ (requires baking after printing)
• Metal Clay, including Precious Metal Clay (PMC) (requires firing after printing)
• Porcelain (requires firing after printing)
• Plasticine http://www.youtube.com/watch?v=cw8XiW46G0k
• Play-Doh http://www.youtube.com/watch?v=dihvAQR7LQg
• Sculpey http://www.sculpey.com/ (requires baking after printing)
• Sugru (self-setting rubber) http://www.youtube.com/watch?v=nuii5rP53Js http://sugru.com/
• RTV Silicone http://en.wikipedia.org/wiki/RTV_silicone

If you have suggestions of material for us to test, please let me know.

[Davo]

The COD-25 Tool

The COD-25 is a modular, hot-swappable head which prints in resins at room temperature; we photoinitiate crosslinking as we dispense.

Validated Materials:

• PEG http://en.wikipedia.org/wiki/Polyethylene_glycol

If you have suggestions of material for us to test, please let me know, along with the wavelength for crosslinking.

[Davo]

The MK1-450 Tool

The MK1-350 is a modular, hot-swappable head which prints 1.75mm filaments at up to 450°C

Validated Materials:

• Polycarbonate http://en.wikipedia.org/wiki/Polycarbonate
• PEEK https://en.wikipedia.org/wiki/PEEK
• PPSU https://en.wikipedia.org/wiki/Polyphenylsulfone

[Davo]

The KRA-15 Tool

The KRA-25 is a modular, hot-swappable head which prints in any pasty extrudable which is printable at up to 150C

Validated Materials:

• Waxes
• PCL (Polycaprolactone) https://en.wikipedia.org/wiki/Polycaprolactone
• 3M Scotch Weld 3796 Hot Melt Adhesive https://www.3m.com/3M/en_US/company-...4747588&rt=rud

If you have suggestions of material for us to test, please let me know.

[Davo]

Added PEEK for the MK1-350.