Results 1 to 4 of 4
Thread: 2d gcode?
Threaded View
-
11-24-2015, 08:55 AM #2
- Join Date
- Jun 2014
- Location
- Burnley, UK
- Posts
- 1,662
I would think that with a bit of messing some slicers could do this. If you set the layer height to 30mm then your Gcode file will have exactly what you need in it.
I have ramps in both my laser cutter and my CNC mill. I use Inkscape to make the laser files but it is 2D only I think.
BambuX1Carbon($2k) vs MarkTwo($20k)
05-31-2024, 12:45 PM in 3D Printers (Hardware)