Results 1 to 3 of 3
Threaded View
-
11-20-2015, 08:02 AM #3
- Join Date
- Nov 2014
- Posts
- 32
Thanks Roxy!
I think that's all it is. I realized that the settings here http://zennmaster.com/random-things/...-2-fine-tuning were for 0.2mm anyway.
The model prints fine at 0.2mm for me, so all is good for now.
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion