Results 1 to 4 of 4
Thread: Extruder not feeding
Threaded View
-
08-16-2015, 07:41 AM #4
BTW, that picture seems to be a variation of the MKS base. http://reprap.org/wiki/MKS_BASE
But there's still some confusion. Your board is marked as a v1.3 board and has the stepper drivers integrated onto the board. Searching the web for MKS boards, other v1.3 boards require separate drivers to be plugged onto the base board.
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help