Results 1 to 3 of 3
Threaded View
-
02-25-2015, 07:00 AM #3
- Join Date
- Dec 2014
- Posts
- 12
Looks like a solid design. A moving gantry takes up half as much space too as the usual budget moving table. A fixed table also makes vacuum hold down easier to design. Undescribed so far is what the gantry risers are made of. Looks like solid acrylic, which is pretty stiff actually, but if I was doing DIY I'd use fiberglass G10, sourced cheaply on Ebay over time.
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help