Results 1 to 5 of 5
Threaded View
-
02-23-2015, 05:01 PM #4
- Join Date
- Jan 2014
- Posts
- 462
Try a print with the nozzle size set at 0.35 mm. If it is, but you're set up for 0.5, you're going to have problems.
Try a print with the nozzle size set at 0.35 mm. If it is, but you're set up for 0.5, you're going to have problems.
Holes and pockmarks in print walls
06-04-2024, 09:14 AM in General 3D Printing Discussion