Results 1 to 2 of 2
Threaded View
-
12-23-2014, 01:43 PM #2
- Join Date
- Apr 2014
- Posts
- 228
That would be pretty low on my list of mechanisms to use. A "single" delta is effectively a spring, now you're compounding that three times. A single delta, that's manageable, but the video shows a very wobbly mechanism that requires the acceleration to be significantly reduced to minimize the wobbling.
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion