Results 91 to 100 of 476
Thread: Itty Bitty Double Extruder
-
12-07-2014, 05:59 PM #91
- Join Date
- Oct 2014
- Posts
- 8
Thanks for the tips
I cleaned out that area by scraping a large flat end screwdriver in their and now it's pretty flat.
When I cleaned out the filament hole, I ended up putting a little bevel on it. I hope it won't negatively affect it.
The filament moves pretty freely through both holes with just a small amount of resistance. Is that fine, or do I need to touch it up with something?
BTW. Given that I'm about to go to the time and expense of implementing dual extrusion, is their any benefit of changing over from 1.75mm to 3mm filament?
Great community - appreciate all of the help
-
12-07-2014, 06:42 PM #92
Yea, maybe it was blobby inside or some other issue. The outside looked beautiful so I expected the inside to be the same. Could be just a one-time malfunction on my end. When I put filament it the first time it just snagged a bit. So, I reemed it with the all-thread and then it was smooth as glass. Who knows. Bottom line, the model 'clough42' built is a very clean file. I'm sure my issue was not related to the model but to the printer.
BTW, what is that red handled thing that we all need?Bambu P1S/AMS
NVision4D http://nvision4d.com
-
12-07-2014, 06:56 PM #93
The red handle thing is as I call it a whirlegig deburr tool. It will shave time off your tasks so you can spend time with the misses. Lol.
-
12-07-2014, 08:14 PM #94
- Join Date
- Nov 2014
- Location
- Orange, CA
- Posts
- 78
here is the hotend model
https://grabcad.com/library/hexagon-hotend-1
if anyone wants it
-
12-07-2014, 08:31 PM #95
-
12-07-2014, 09:03 PM #96
- Join Date
- Oct 2014
- Posts
- 134
-
12-07-2014, 10:16 PM #97
Got it too Joe. Looks great. I created a rough one for major dimensions to work with Itty Bitty but it's nice to have a full model. Thanks.
Bambu P1S/AMS
NVision4D http://nvision4d.com
-
12-07-2014, 11:03 PM #98
It's a deburring tool. Sometimes also called an edge breaker.
http://www.amazon.com/SHAVIV-151-900...deburring+tool
-
12-07-2014, 11:20 PM #99
Yep, figured it out and coincidentally, that's exactly what I ordered 3 hours ago.
Bambu P1S/AMS
NVision4D http://nvision4d.com
-
12-09-2014, 06:49 AM #100
- Join Date
- Nov 2014
- Location
- Orange, CA
- Posts
- 78
http://3dprintboard.com/showthread.p...ll=1#post38812
made a extreme hotbed switching board if anyone is interested..
20$ shipped with 6ft of 10ga ultra flex silicone cable and 3pairs of XT60 connectors
.052v drop at 60amps .03 at 30amps opto-isolated
ATX brain still in the works
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help