New to 3D Printing and need some help.

[BLKKROW]

I'm usually running the 'experimental' release. My printer is broke right now, but if it wasn't I would be at 1.1.6 I'm actually at 1.1.0 right now. But with that all said, you can run Slicer as a stand alone program. You can create a short cut icon on your desktop and just double click it. That is how I prefer to do things because I have more control. But you can also just let your printer program run it for you. One of the options on Slicer is what type of GCode it should produce. I don't know what Replicator-G's type is.... But you need to set it correctly in Slicer. You do that at:

Printer_Settings / General / Firmware / G-code_Flavor

Thank you for responding.

I have successfully used Slic3r outside of Repg. I am also having the extruder being rattled on one side even after removing 15mm off the X axis on my Bed size. So I will keep removing some length off to see what happens.

I have included the pictures of the first print using Slic3r outside of repg. I am having an issue with the base layer which I was not having before even though I am using the same settings.

Any help with that?