Close



Results 1 to 7 of 7
  1. #1

    Ender 3 PRO with sprite pro extruder and CR touch, z-offset&firmwere problem,

    Hello there,I have a few problem on my ender 3 pro after I did major upgrade. I changed stock extruder to dual gear direct extruder SPRITE pro also I added CR touch. Mainboard is 4.2.7. After this I updated firmware to Ender-3Pro SpritExt Firmware (https://www.creality.com/pages/download-sprite-extruder) from creality page. After that I have a few problems which I cant solve.
    1. printer won't remeber Z offset probe even I stored configuration
    2. printing bed offsets is limited to 210mm, any other firmwares has limitation to 235mm. And I dont know how to change it.
    3. printer sometimes switch to chineses language
    4. first layer has some holes in it, even thought remaining part is perfect (perfect for me ) ) check photo...filament ist petg wit 0.02mm accuracy, also have dust remover installed to prevent nozzle clogDo you have any ideas how to solve some of my problems? I am totaly desperate..Thank you in advence for any tips how to solve it.

    //nozzle is new 0.6mm. cura settings 0.3mm layer and 0.45 layer thickness/ 0.4layer and 0.6 thickness
    Attached Images Attached Images

  2. #2
    You could try a firmware like th3ds or marlin this is a link for the th3d version. https://www.youtube.com/watch?v=cD3BTMKq3GA

  3. #3
    gonna check thank you for answer

  4. #4
    glad i could help

  5. #5
    You could try a firmware like th3ds or marlin this is a link for the th3d version youtube apk

    https://www.youtube.com/watch?v=cD3BTMKq3GA
    thanks, finally get this solution.
    Last edited by melvinard; 03-31-2023 at 03:19 PM.

  6. #6
    all good glad to help

  7. #7

    Same problem with my Ender 3 pro

    Hi, I did the same updates as you on my Ender 3 Pro and I have exactly the same problem. Could you help me with the firmware you used to solve it? Thanks in advance for your help.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •