Results 1 to 3 of 3
Threaded View
-
07-21-2022, 05:07 PM #2
- Join Date
- Jun 2014
- Posts
- 885
80 mm / sec is moving right along. A couple of things to try would be to slow by 10-15 mm / sec and/or increase the temperature by 5-10 °C. This does not address the inconsistency of the defect, but may help to narrow a solution.
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help