Results 1 to 5 of 5
Threaded View
-
07-15-2022, 07:09 PM #4
Of course you can set the fan speed in many placed in G-Code, even though you tell fan to spin 100% the sliced can quickly change it back to 50%
Open the G-Code that will not allow you to set G-Code to 100% with Note Pad ++ search for M106 to see it it may be changing fan speed after your setting it to 100%
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion