Results 1 to 4 of 4
Threaded View
-
06-23-2022, 05:34 AM #3
- Join Date
- May 2020
- Posts
- 626
Leveling a bed with a feeler gauge will only tell if the bed is flat, not if it is level to the 'X' and 'Y' axis.
If the bed was tilted at 30 degrees it would still show as level using a feeler gauge and straight edge.
Just print a bed level test to check.
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help