Results 1 to 4 of 4
-
09-19-2016, 07:55 AM #1
- Join Date
- Sep 2016
- Posts
- 3
Thumb-controlled 3-D printed prosthetic hand?
I realize most of the available 3-D printed prosthetic hand designs control the opening and closing of the fingers and thumb by wrist movement. Do any designs exist where the 4-fingers open and close by thumb movement?
My son was born with symbrachyltactyly of his left hand that left him with a fully functional thumb but without the 4 fingers. Such an alternative design may be more suitable for him.
-
09-27-2016, 06:35 AM #2
can't see any reason why it couldn't be done.
contact Enable: http://enablingthefuture.org/
-
03-24-2020, 04:47 AM #3
Hello.
I have a brother who had a car accident, and was forced to have his leg amputated from the knee down.
Travel is really difficult with a wooden leg, often with joint pain.
So what better, softer material can I use so my brother's leg won't hurt?
-
03-24-2020, 03:05 PM #4
- Join Date
- May 2018
- Posts
- 582
check this site for ideas and material https://amputeestore.com/collections/prosthetic-liners
Kickstarter campaing LEGENDARY...
Today, 08:02 AM in Free Self Promotion