Results 1 to 3 of 3
Thread: Mosfet
Threaded View
-
10-11-2017, 05:39 AM #3
so the answer is - yes, running heatbed directly through cheap 3d printer boards is a major issue.
On my k200, I can do 50c bed 210 nozzle all day long.
But 90c bed and 250 nozzle - nope she can't handle that. Both end up running around 10c lower than set.
So I will be fitting a mosfet as soon as it arrives.
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help