Hello! I am trying to do 4 "larger" prints. The first took 8 hours and came out perfectly. The next two took 12 hours each, and came out perfectly. I am down to the last piece. Yesterday, the machine clogged about 40% of the way through. I took it apart and fixed it - tested it and it worked perfectly. I started the print again. This morning around 3am, I checked on the print, and sure enough, the dang thing had clogged again!!! I don't know why it keeps doing it, and now its frustrating!

I am printing with the nozzle at 200 degrees, the bed is at 70 degrees. Nothing has changed from the first three prints!

Please help!