Results 1 to 10 of 102
Thread: Itty Bitty Double FLEX Extruder
Threaded View
-
04-14-2015, 10:53 AM #11
- Join Date
- Mar 2015
- Location
- Palo Alto
- Posts
- 63
Hexagon Ø0.4mm hotend, Ø3mm PLA at 205ºC. The hexagon heatsinks/fans seem to be working well as I can touch them right above the fiber/kapton insulation and they are quite cool.
I have Pololu 1209 NEMA14 motors. Voltage on the A4988 drivers is 0.32-0.325VDC which if my math is correct is ~0.8A. When it skips the entire belt path rotates backwards including the metal gear and motor shaft (presumably under the force of the filament pushing back on the hobbed bolt) so I don't believe there is a belt or gear anchoring issue.Last edited by jasay; 04-14-2015 at 01:28 PM.
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help