Results 1 to 10 of 102
Thread: Itty Bitty Double FLEX Extruder
Threaded View
-
04-13-2015, 09:10 AM #11
- Join Date
- Mar 2015
- Location
- Palo Alto
- Posts
- 63
Yeah. Just checked the drivers and they were almost 0.5V (thought I checked them when I first built the machine, but maybe only the axis motors and Colin says 0.39-0.5 for the NEMA17 so they would have been top of the spec for those motors anyway). Adjusted to 0.32V which if I understand correctly should be ~0.8A. Will kick off a print when I get home from work to check. Thanks for the reminder that these smaller motors may need different settings.
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help