Results 1 to 10 of 476
Thread: Itty Bitty Double Extruder
Threaded View
-
12-07-2014, 10:44 AM #11
'TechMasterJoe' thanks for the model. Nice.
'lemming' it printed really well for me too. 'clough42' designed it to print without support. Mine came out really well and I don't remember that I had to drill out the bottom. What I did find though was that the inside of the filament path was not very smooth. I took a 1 foot piece of all-thread (1//8") and ran it up and down the channels to polish them out. I went back and forth a lot until the threads had cut a nice smooth channel. I've had no problems printing.Bambu P1S/AMS
NVision4D http://nvision4d.com
Holes and pockmarks in print walls
06-04-2024, 09:14 AM in General 3D Printing Discussion