Results 1 to 3 of 3
Threaded View
-
07-23-2014, 02:30 PM #1
I need a piece of PTFE id=3mm od=8mm
Hello everybody! I need to replace a piece of PTFE in my hot-end. I'm running 3mm filament. So I'm not sure, but the inner diameter needs to be a little larger than 3mm and the outer diameter needs to be 8mm. And it needs to be at least 30mm long.
I can't find anything suitable. I've checked all the usual places including eBay. Can anybody point me in the right direction?Last edited by Roxy; 07-23-2014 at 02:56 PM.
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help