Results 1 to 5 of 5
Thread: Reduce outer diameter axis
Threaded View
-
05-04-2022, 06:52 PM #1
- Join Date
- May 2022
- Posts
- 2
Reduce outer diameter axis
Hello
Have tried in Fusion 360 to reduce the outer diameter of the middle hollow axis by 0.7mm, i.e. from now approx. 16.5mm to new 15.8mm. The inner diameter of 8mm should remain the same.
Unfortunately, I have not managed it
Could someone help me and if possible immediately adjust the STL
Have the STL (may be changed according to license) and a sketch attached.
Thanks and best
My 3D Norn Emissary print
09-13-2024, 02:28 AM in 3D Printing Gallery