Results 1 to 3 of 3
Threaded View
-
05-16-2014, 07:44 PM #1
- Join Date
- May 2014
- Location
- Scotland
- Posts
- 23
Flashforge Creator X extruders hitting off the frame?
Hi,
I boought the Flashforge Creator X yesterday. I set it up and had no idea what to do but after researching online, i managed to update the firmware etc. Now however, the extruder seems to be pushing pla out just off the board and the extruders themselves hit the frame on the left/right (x axis?) and make a grinding noise for a second. Also, when i try to level the plate again, the nozzles aren't even on the plate! I've looked everywhere for a fix. I used the ReplicatorG software and It might say something in there to fix this but I cant find it. I don't know what to ask and I cant see any reference to this issue online.
Im really looking for a button that says "reset extruders to middle of machine" or something.
Any help would be amazing because I'm too nervous to even put the thing back on just now incase i damage the motor.
Thanks guys
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help