Results 1 to 9 of 9
Thread: Raft Sticking to Parts
Threaded View
-
01-12-2018, 11:35 AM #2
- Join Date
- Jul 2017
- Posts
- 193
Try adjusting the Raft Air Gap and the Initial Layer Z Overlap settings. They are in the Build Plate Adhesion section. If they are not visible when Raft is selected, press the settings icon ( gear) next to the drop down arrow and check those two settings.
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help