Results 1 to 2 of 2
Thread: Primer/filler needed
Threaded View
-
07-03-2017, 05:30 PM #2
- Join Date
- Jul 2017
- Posts
- 1
I print plugs to make composite molds. I use a lot of polyester primer on my prints. its high build and sands easy. smooths out a lot of the small imperfections. I use Evercoat feather fill. But not sure if you can get that brand in the UK. I sometimes use some bulldog adhesion promoter first on the bare ABS. Just to ensure the primer bonds well to the ABS.
Holes and pockmarks in print walls
06-04-2024, 09:14 AM in General 3D Printing Discussion