Results 1 to 6 of 6
Threaded View
-
12-18-2016, 08:03 PM #1
- Join Date
- Dec 2016
- Posts
- 43
Slicer Settings for easy to remove supports
I was using version 0.9.9 and recently switch to 1.29. My biggest issue is mastering the support settings, I expect to have to do some work, but in some cases its a real pain, does anybody have settings they have found good to weaken the bond of the supports. Thanks.
Ender 3v2 poor printing quality
10-28-2024, 09:08 AM in Tips, Tricks and Tech Help