Results 1 to 10 of 11
Threaded View
-
11-02-2016, 01:25 AM #2
- Join Date
- Sep 2014
- Location
- Brummen, Netherlands
- Posts
- 265
This is a piece of cake in Netfabb (Basic).
Import the part (Menu:Project->add part), use the menu at the lower right (sliders) to select where to cut in x,y,z direction. Then cut the selected part (or all parts). Then select one half (click->green) and export it (Menu:Part->export) as ASCII stl. same for the other half.
New member with print issue
06-11-2024, 08:57 AM in Tips, Tricks and Tech Help